COURSE OVERVIEW:

The stability and reliability of a power system depend on a deep understanding of its electrical behavior under both normal and abnormal conditions. This course provides a technical framework for the "Three Pillars" of system analysis: Load Flow, Short Circuit, and Stability. Participants will explore the mechanics of "Power Balance," learning how active and reactive power flow determines the voltage profile and efficiency of the network.

The scope of this training addresses the mathematical and engineering foundations required to predict system response to changes in generation or load. It covers the technical nuances of "Fault Analysis," focusing on "Symmetrical Components" to resolve unbalanced faults into manageable calculation models. The curriculum provides a detailed focus on "Transient Stability," ensuring that participants can determine the "Critical Clearing Time" required for protection systems to prevent total grid collapse.

Coverage includes the implementation of steady-state and dynamic analysis techniques for modern grids with high renewable penetration. Attendees will learn to utilize "P-V and V-Q Curves" for voltage stability assessment and to analyze the "Swing Equation" for rotor angle stability. By combining circuit theory with practical grid management strategies, the course equips professionals with the expertise required to conduct the fundamental studies that ensure the continuous and safe operation of power networks.

COURSE OBJECTIVES:

After completion of this course, the participants will be able to:

• Define the mathematical formulation of the "Power Flow" problem.
• Perform "Per-Unit" (p.u.) conversions for multi-voltage system analysis.
• Execute "Load Flow" calculations to determine bus voltages and losses.
• Utilize "Symmetrical Components" to solve unbalanced fault conditions.
• Calculate "Short Circuit" levels for 3-phase and Line-to-Ground faults.
• Determine "Circuit Breaker Ratings" based on fault duty.
• Analyze "Rotor Angle Stability" using the "Swing Equation."
• Determine the "Critical Clearing Time" (CCT) for system faults.
• Evaluate "Voltage Stability" using P-V and V-Q analysis.
• Identify the impact of "Inertia" on system frequency stability.
• Conduct "Sensitivity Analysis" for capacitor and tap changer settings.
• Interpret "Dynamic Simulation" results for grid contingency planning.

TARGET AUDIENCE:

This course is intended for Power System Engineers, Grid Planning Specialists, Substation Engineers, and Senior Technical Staff involved in system studies.

TRAINING COURSE METHODOLOGY:

A highly interactive combination of lectures, discussion sessions, and case studies will be employed to maximize the transfer of information, knowledge, and experience. The course will be intensive, practical, and highly interactive. The sessions will start by raising the most relevant questions and motivating everybody to find the right answers. The attendants will also be encouraged to raise more of their questions and to share in developing the right answers using their analysis and experience. There will also be some indoor experiential activities to enhance the learning experience. Course material will be provided in PowerPoint, with necessary animations, learning videos, and general discussions.

The course participants shall be evaluated before, during, and at the end of the course.

COURSE CERTIFICATE:

National Consultant Centre for Training LLC (NCC) will issue an Attendance Certificate to all participants completing a minimum of 80% of the total attendance time requirement.